Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
9
1.1 Create a new fixture profile
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 01.Create a new Fixture is shown on the monitor,
press ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #2 and #4 to change the name of the FIXTURE. Turn Jog wheel #2 to
change the position of the cursor, and Jog wheel #4 should be used to change the
trait of the channel or character. The amount of the letters must be below 26, it can
be include ten numbers, one “—”, the length of the Fixture name should be below
16, and it must be begin with letter.
4. Press ENTER/MAIN MENU button to change the trait of the channel.
5. Use Jog wheel #2 and #4 to change the trait. Turn Jog wheel #2 to change the
position of the cursor, and Jog wheel #4 to change the trait of the channel or
characters.
6. Press ENTER/MAIN MENU to enter
7. Use jog wheel #2 to select prole (ACME LIBRARY or OTHER LIBRARY) you want
to store the xture prole.
8. Press ENTER/MAIN MENU button, all LEDs blink for 3 times to indicate that you
have successfully edited a FIXTURE PROFILE.
9. Repeat steps 3-4 to build 50 FIXTURE PROFILE mas.