Manual

www.thomann.de
INVADER 2420
8
www.thomann.deINVADER 2420
Operation guide (Operating steps instructions)
When power is turned on, the controller starts self testing automatically, the LCD Display indicating the self
testing progress. After it is nished, the xture pilot on the rear board is on, which means that you can start to
operate the controller.
1. Setting menu
Entering the menu
1. Enter Program mode.
2. Press ENTER/MAIN MENU Button to enter LCD screen main menu.
Exiting from the menu
Press ESC/CLEAR button to exit from the last menu until exit from the Menu totally.
The main Menu including the following 17 settings:
1. Create a new Fixture Prole
2. Modify a Fixture Prole
3. Delete a Fixture Prole
4. Patch a Fixture
5. Reverse channel setup
6. Fade mode setup
7. Blackout mode select
8. Midi channel select
9. Chase run by inside/outside time
10. Auto remote address
11. Read CF card
12. Write CF card
13. Modify Password
14. Enable Password
15. Erase all memory
16. audio input range adjust
17. Channel value display mode
You can select the Menu by Jog wheels and press ENTER/MAIN MENU to enter sub
Menus for editing.