Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
7
Fixture number channel list
Fixtures number buttons Fixture DMX channels Fixtures number buttons Fixture DMX channels
1 1-24 11 241-264
2 25-48 12 265-288
3 49-72 13 289-312
4 73-96 14 313-336
5 97-120 15 337-360
6 121-144 16 361-384
7 145-168 17 385-408
8 169-192 18 409-432
9 193-216 19 432-456
10 217-240 20 457-480
23. ESC/CLEAR Button Back to last menu/delete all the output when program
24. Enter/main menu Button Conrm or enter next menu or enter main menu
25. LCD Display Show the current activity or programming state.
26. Jog wheel Used to adjust the chase speed within the range of 0.1 second to
5 minutes.
Rear view
1. Power in AC100-240V 50/60Hz.
2. Power Switch This switch turns On/Off the power.
3. STROBE Trigger non-DMX strobe. Signal +12V DC.
4. AUDIO 0.1V~1Vp-p.
5. MIDI IN or MIDI THRU Receives MIDI data.
6. DMX Out Two connectors sends DMX signals to DMX xtures, use 3 pin
XLR plug cable to link the xture together.
7. STAND ALONE The connectors are used only in master/slave mode, using 5 pin
XLR cable microphone jack of the rst xture, you will nd that the
remote control on the rst unit will control all the other units for
Stand by, Function and Mode.