Manual

www.thomann.de
INVADER 2420
6
www.thomann.deINVADER 2420
1. Fog Machine Button Activates Fog Machine.
2. STROBE Button Trigger strobe.
3. Fixture Group Button Select /set one or more xtures group
4. Fixture Button Select one or more xtures
5. Preset Button Select/set the colour & gobo preset.
6. Movement Button Select/set the pan & tilt movement
7. Chase Button Run Chase and save Scene to Chase
8. Cue Button Save several Chases together and make them run at the same
time
9. Bank Button Press the Bank buttons to load or stored your scenes. There are a
maximum of 1200 programmable scenes.
10. Override Button Override the xture/ xtures when the show is running.
11. Centre Button Select/set the pan & tilt centre.
12. Manual/Rec Button Used to control manual operation or to record programs.
13. Program Button Activates Program mode.
14. Music/Bank Copy Button Activates Music mode or to copy a bank of scenes.
15. Tap/Insert Button Used to create a standard beat or insert a scene to chase.
16. Auto/Del Button Activates Auto mode or to delete scenes or chases.
17. Blackout/ Stand Alone Button Select Blackout/Stand Alone two modes.
18. USB Light Connect to USB Light
19. Faders These faders are used to control the intensity.
20. CF card CF card port can be used to upgrade software, copy data and
introduce to light bank
21. Stand alone Extra easy controllers Incorporated for Master/Slave immediate
pre-programmed light shows.
22. Multi- function number buttons 1-20
Function buttons The descriptions of the Function buttons
1 Fixture Select 20 units of Fixtures Pls refer to the following
table for Fixture addresses
2 Fixture Group Set or select 20 Fixture Groups
3 Movement (only 1-10) Select or operate 10 Movements
4 Preset 20 groups of xtures can be set or selected by Jog
wheel PAN .10 colour Preset(1-10) and 10 GOBO
Preset(11-20) each group
5 Cue Set, select or operate 60 Cues
6 Chase Set, select or operate 60 Chases
7 Override Set and select 20 Overrides
8 Bank 60 banks( each bank with 20scenes) can be set and
selected by Jog wheel #1
9 centre Set, select and operate 20 Centers
10 Number 1-20 button 1. 1-10 (10 stand for 0) Number for setting and input-
ting password.
2. 1-10 10 MOVEMENT can be selected.
3. 1-10 can be used to select 10 groups of COLOUR
PRESET; 11-20 can be used to select another 10
groups of GOBO PRESET.
4. 1-20 can be used to select 20 CUE/PAGE CHASE/
PAGE SCENE/BANK OVERRIDE CENTRE FIX-
TURE.