Manual

www.thomann.de
INVADER 2420
52
www.thomann.deINVADER 2420
8. Profile create notice
PROFILE.CIF (as the prole cyclostyle)
The nished le should use a short name below 8 characters, All use capital letters and sufx with CIF transito-
rily. (IL-2420 controller nonsupport long le name) or the controller can’t read up the prole information.
IM-1200S.CIF is the prole of ACME IM-1200S
Enactment special code, so the controller should distil some channel characteristic to manage.
; ARRT CODE
; D = DIMMER DIMMER
; P = PAN PAN
; PF = PAN FINE PAN FINE in 16 channel mode
; T = TILT TILT
; TF = TILT FINE TILT FINE in 1 6 channel mode
; G = ALL GOBO CORRELATION CHANNELS transfer all gobo correlation channel to preset gobo
; C = ALL COLOUR CORRELATION CHANNELS transfer all colour correlation channel to preset gobo
; N = ETCAETERAS CHANNELS else channels should be signed N
The channel display message should be no more than 4 capital letters or underline or number,
and must be bracket with double quotation marks. Don’t replace by blank if shorter 4 charac-
ter.
You’d better input in English mode, ensure all the input characters are DBC but not SBC case
q “DIM” ;right
w “DIM ” ;wrong for the blank
e “dim” “DIm” ;wrong for the lowercase
r ‘ ‘DIM’ ’ ;wrong for the SBC double quotation marks
Don’t change the group which contain”;********”
Store the prole that you want to input to the controller under the root directory of CF card.
EXP: If CF card is disk F, then the le input route should be “F:\DIR2402\IM-1200S”
The format of CF card should be FAT16 but not FAT32.
IL-2420 PROFILE ;********
VER1.0 ;********
; ADD ACME AND OTHER LIGHT LIBBER SELECT
DEFAULT ACME; ACME AND OTHER
; FACTORY / MODEL MODEL = MAX 16 CHARACTER
NAME „AMCE“ „IM-1200SZ-24“
; LIGHT CHANNEL NUMBER MAX 24
CHANNEL 24
DMX ;********
; DMX CHANNELS LIST
; CHANNEL MAX 24 DON‘T REPEAT MAX 2 CHARACTER
; | ARRT CODE MAX 2 CHARACTER
; | | DISPLAY INFORMATION MAX 4 CHARACTER DON‘T HAVE BLANK