Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
49
B. When CUE or CHASE or BANK running, press OVERRIDE button, then use 1-20
button to open the effect that be programmed.
4. Fog machine operation
Set up another 481CH DMX signal to control the fog machine (keep out the 482CH).
Fog Machine operation:
1. Connection: connect the fog machine with the DMX information.
2. Setting: Keep the power on , hold the FOG MACHINE button the press PROGRAM
button to enter the output menu,
Use #2 or #3 or #4 to setup duration set (1-100S) or interval set(0-200S) or volume
out(0-255).
Press ENTER/MAIN MENU button to store Press PROGRAM button to exit
3. Control: The fog machine work as it’s set in normal. Press FOG MACHINE button to
output maximal fog (set 481CH output to be 255).
5. Strobe light operation
Set up 483~484CH address in the DMX signal to control the strobe light channel
Operation
1. Connection : connect the strobe light with the DMX information
2. Setting: keep the power on, hold the STROBE button press PROGRAM button to
enter setting menu, Use jog wheel #2 to set the strobe speed of the simulate strobe
light.