Manual

www.thomann.de
INVADER 2420
48
www.thomann.deINVADER 2420
3. Press number Button 1-20 to select the program you anticipate. You can choose
much more than one CHASE, and they will run on the train that you select them.
4. Setting to CHASE RUN BY INSIDE TIME, then it will run as the FADE TIME or
FADE TIME of the step that you set when store the chase. Setting to CHASE RUN
BY OUTSIDE TIME , then it will run as the FADE TIME or FADE TIME you set last
time, you can also adjust by turn the joy wheel #3 or #4, or use TAP/INSERT Button
to adjust the speed.
NOTE: When you press TAP/INSERT to adjust the speed, adjusting the running speed of the scene is based
on the interval of pressing the Press TAP /INSERT Button twice which no more than 10 minutes.
3.3 Running a cue
CUE can only run in manual mode.
1. Press CUE Button, use jog wheel #1 to select chase page.
2. Press number button 1-20 to select the CUE you anticipate. You can choose much
more than one CUE and they will run on the train that you select them.
NOTE: If a CUE includes several chases with different run time, we regard the run time of the chase with the
longest run time as the CUE‘s longest run time and the chase with short run time will repeat automatically.
3.4 Over control
Using over control to change the effect specially, you can operate some units solely when the CUE or CHASE
or BANK running. There are two ways to operate:
A. When CUE or CHASE or BANK running, press OVERRIDE button, Then press
FIXTURE button, and use number button 1-20 to choose light, so you can push the
handspike to change the effect.