Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
43
4. Press the number button to edit the Chase in CUE.
5. Press MANUAL/REC button, all LEDs blink for 3 times to indicate that you have
successfully edited a CUE.
6. Press PROGRAM button for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
2.23 Delete a cue
1. Enter Program mode.
2. Press and hold AUTO/DEL button.
3. Press CUE use jog wheel #1 to select the page number.
4. Then press the number button 1-20, all LEDs blink for 3 times to indicate that you
have successfully deleted a CUE.
5. Press PROGRAM button for 3 seconds to exit Program mode, the LED goes out
indicating this operation.