Manual

www.thomann.de
INVADER 2420
42
www.thomann.deINVADER 2420
2.21 Program a cue
1. Enter Program mode.
2. Press CUE button use jog wheel #1 to select the page number.
3. Press the number button 1-20 to select the to be stored CUE number, at this
moment, all LEDs on CHASE are lit and all LEDs on the number button which have
saved CHASE will blink. Turn jog wheel #1 should change the page number.
4. Press the number button 1-20 to select the Chase number which is to be stored to
CUE, the LEDs on the chosen number buttons will be lit.
5. Press MANUAL/REC button, all LEDs blink for 3 times to indicate that you have
successfully stored a CUE.
6. Repeat steps 4-6 to store more CUEs.
7. Press PROGRAM button for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
2.22 Cue editing
1. Enter Program mode.
2. Press CUE button, use jog wheel #1 to select the page number.
3. Press the number button 1-20, to select the to be edited CUE number, at this
moment, all LEDs on CHASE are lit and all LEDs on the number button which have
saved CHASE will blink. Turn jog wheel #1 should change the page number.