Manual

www.thomann.de
INVADER 2420
4
www.thomann.deINVADER 2420
Introduction
Thank you for purchasing our Invader 2420. Enjoy your new equipment and make sure to read this manual
carefully before operation!
Features
X 2 x DMX Outputs
X 484 DMX Channels in total, including 481Ch. for DMX fog, 482Ch. for future use, 483-484Ch. for DMX
strobe
X Fixture Library ( for built-in ACME lighting xtures; Other brand xtures can be set manually but
Max. with 50 xtures
X Built-in 10 MOVEMENTS - Can adjust PAN/TILT Position PAN/TILT Range Fade time or Wait time
LOOP
X 60 Programmable Chases, each chase can have 200 scenes max
X 1200 Programmable Scenes (60 banks x 20 scenes)
X 400 Programmable Presets (20 presets, each preset has 10 colours and 10 gobos)
X Control 20 DMX light xtures, and each xture up to 24 Channels
X Operate 20 Fixture groups simultaneously
X 24 faders for controlling 24 DMX channels
X 60 x CUEs (Combined many chases together and operate the chases at the same tine)
X 20 x override – Can assign one (or more than one) of the xtures to perform special function, like
follow spot, during the operation. 20 overrides can be set in the controller
X 20 x Centre - Can set each xture’s central position of the movement; you can set up to 20 centre
positions
X Remote DMX Addressing only for ACME lights
X Blackout mode - 1. Standby 2. PAN/TILT Centre Position 3.Blackout Scene
X Can use jog wheel to adjust the audio sensitivity (LCD display will indicate the value)
X Can set Password to boot the controller
X Lock/Unlock memory/Need password to clear all memory
X Standard MIDI facility
X Lighting Library and software downloaded available
X DMX fog machine control 481 Ch.
X Both DMX (483 & 484) and analog strobe control available (Via LCD display, people can adjust the
speed of analog strobe)
X 2 remote Easy Controller ( CA-8 )
X Gooseneck USB LAMP
NOTE: Some basic knowledge of MIDI and DMX is required to fully utilize this unit.