Manual

www.thomann.de
INVADER 2420
34
www.thomann.deINVADER 2420
3. Roll the Jog wheel #1 to select Preset groups 1-20.
4. Press the number button 1-20 to open the to be edited preset.
5. Press FIXTURE button.
6. Press the number button 1-20 to select the concerned xtures to program Preset.
7. Move FADER 1-24 to change COLOUR/GOBO channel values (The codes of the
channel feature of ARRT CODE are “C” and “G” in the xtures bank) output for the
convenience to check other channels but the channel output will not be stored in the
preset.
8. Press MANUAL/REC button , at this moment, all LEDs on CUE, OVERRIDE,
CENTRE, FIXTURE GROUP, PRESET, CHASE, BANK, BLACKOUT blink at the
same time.
9. Press PRESET Button.