Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
33
4. Move the FADERS1-24 to change COLOUR/GOBO channel values (The codes of the
channel feature of ARRT CODE are “C” and “G” in the xtures bank) output for the
convenience to check other channels but the channel output will not be stored in the
preset.
5. Press the button MANUAL/REC at this moment all LEDs on buttons CUE,
OVERRIDE, CENTRE, FIXTURE GROUP, PRESET, CHASE, BANK, BLACKOUT
blink at the same time.
6. Press the button PRESET.
7. Use Jog wheel #1 to select the preset group number 1-20.
8. Press one of the number button 1-10 to store a COLOUR preset or press one of the
number button 11-20 to store a GOBO preset, all LEDs blink for 3 times to indicate
that you have successfully store a Preset.
9. Repeat Steps 2-8 to program more presets.
10. Press the button PROGRAM for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
2.14 Preset Editing
1. Enter Program mode.
2. Press PRESET Button to select programming Preset state.