Manual

www.thomann.de
INVADER 2420
32
www.thomann.deINVADER 2420
8. Press the button PROGRAM for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
2.12 Deleting a chase
1. Enter Program mode.
2. Press the button CHASE, use jog wheel #1 to select the page number, choose the
programming chase.
3. Press the button AUTO/DEL.
4. Press the number button 1-20 to select the chase to be deleted, all LEDs blink for 3
times to indicate that you have successfully delete the chase.
5. Repeat the steps 2-4 to delete more chases.
6. Press the button PROGRAM for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
2.13 Programming a preset
1. Enter Program mode.
2. Press the button FIXTURE
3. Press the button 1-20 to select the concerned xture of preset programming.