Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
29
4. Use Jog wheel #2 to view the steps, the strobe display [002] indicate programmable
step number.
5. Use jog wheel #1 to select the bank number of the scene, press number button 1-20
to open.
6. Use the Jog wheel #3, #4 to adjust the FADE TIME and WAIT TIME which are going
to be added to the single Chase. If you do not make any adjustments, the system
will remember the last FADE TIME or WAIT TIME.
7. Press the button MANUAL/REC all LEDs blink for 3 times to indicate that you have
successfully programmed a step.
8. Repeat steps 2-3 to select other steps.
9. Press the button CHASE to store and exit the programming state.
10. Press the button PROGRAM for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
2.10 Insert steps into a chase
1. Enter Program mode.
2. Press the button CHASE use jog wheel #1 to select the page number, choose the
programming chase.