Manual

www.thomann.de
INVADER 2420
28
www.thomann.deINVADER 2420
5. Use the Jog wheel #3, #4 to adjust the FADE TIME and WAIT TIME which are going
to be added to the single Chase. If you do not make any adjustments, the system
will remember the last FADE TIME or WAIT TIME.
6. Press the button MUSIC/BANKCOPY
7. Press the button MANUAL/REC, all LEDs blink for 3 times, all the programmed
scenes in the Bank will join the Chase.
8. Repeat Step 3-7 can join 200 scenes max to the chase.
9. Finally press the button CHASE to store the chase then exit the programming state.
10. Press the button PROGRAM for three seconds to exit Program mode, the LED goes
out indicating this selection.
2.9 Program a step
1. Enter Program mode.
2. Press the button CHASE use jog wheel #1 to select the page number of the chase
to select the program.
3. Press the number button 1-20 to select the Chase number, LEDs on the BANK
button will be all lit, the LCD will show the number and parameter of the CHASE,
BANK, SCENE, STEP, FADE, WAIT.