Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
27
4. Use the Jog wheel #1 to transfer to other Banks, then press the number button 1-20
to select the scene to store the Chase.
5. Use the Jog wheel #3 to adjust the FADE TIME of present chase, the Jog wheel #4
to adjust the WAIT TIME of the present chase. If you do not make any adjustments,
the system will remember the last FADE TIME or WAIT TIME.
6. Press the button MANUAL/REC, all the LEDs will blink for three times briey
indicating the store succeed.
7. Repeat Step 4-6, each chase can have 200 scenes max.
8. Press the button PROGRAM for three seconds to exit Program mode, the LED goes
out indicating this selection.
2.8 Program all the scenes in a bank
1. Enter Program mode.
2. Press the button CHASE use jog wheel #1 to select the page number, choose the
programming chase.
3. Press the number button 1-20 to select the Chase number, LEDs on the BANK
button will be all lit, the LCD will show the number and parameter of the CHASE,
BANK, SCENE, STEP, FADE, WAIT.
4. Use the Jog wheel #1 to select the Bank number of the programmed Chase.