Manual

www.thomann.de
INVADER 2420
16
www.thomann.deINVADER 2420
5. After 3 seconds, use jog wheel #2 to select the xtures of the rst group, and jog
wheel #4 to select the xtures of the second group. When you turn the jog wheel #2
or #4, the cursor will switch between the rst and second group. The xtures of this
two group will be selected in turn, and the unit will act differently when it be selected.
6. Press number Button 1-20, all the LEDs will blink for 3 times, the address of the
corresponding xture will show on the LCD display, it means the xture’s amount of
the channel is as same as the corresponding number button’s.
7. Repeat 5-6 to set the address of other xtures.
8. Back to the last menu, please press ESC/CLEAR Button.
1.11 Read CF card
If you have stored program les (???????.PRO) or bank les (????????.CIF) in the directory of DIR2420
which under the root directory of CF card, then you can read them out by this function. And you have to patch
the prole in order to use it normally. Every time read the CF card, please don’t move it, or the card or the les
will be damaged. The format of the CF card should be FAT, else you have to convert it to FAT by PC, and copy
it to CF card.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 11. Read cf card is shown on the monitor. Press
ENTER/MAIN MENU button to enter.
3. Use Jog wheel #1 to read the program le 01. Load program le or prole le 02.
Load a xture prole. Press ENTER/MAIN MENU button to enter.
4. The list of the program/prole les will show on the LCD, turn jog wheel #1 to select
the le name. The amount of the les consider to the amount of the program or
prole les which you saved under the directory of DIR2420 in the CF card.