Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
15
1.9 Chase run by inside/outside time
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 09.Chase run by inside/outside time is shown on
the monitor, Press ENTER/MAINMENU Button to enter
3. Use Jog wheel #2 to chose Chase run by inside time or Chase run by outside time
4. Press ENTER/MAIN MENU Button to enter, all the LEDs will blink for 3 times, then
back to the last menu.
1.10 Auto remote address
This function is used only for the xtures which can be addressed long-distance, ensure the unit match this
requirements before operation, or it will be of no effect .
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 10. Auto remote address is shown on the monitor
Press ENTER/MAIN MENU Button to enter
3. Use Jog wheel #2 to select Yes (enter) or NO (quit to the main menu).
4. Press ENTER/MAIN MENU Button to set the address of the xture, wait for 3
seconds, so the xture can receive the signal of the controller and move all the
motors to their “home” position.