Manual

www.thomann.deINVADER 2420
www.thomann.de
INVADER 2420
13
4. Turn Jog wheel #2 to change the position of the cursor, and Jog wheel #4 used to
reverse the channel.
5. Turn Jog wheel #3 to chose the channel, Jog wheel #4 to reverse.
6. Press ENTER/MAIN MENU Button to enter, all the LEDs will blink for 3 times.
7. Repeat 3-6 to reverse other channels.
8. Back to the last menu please press ESC/CLEAR button.
1.6 Fade mode setup
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 06. Fade mode setup is shown on the monitor,
press ENTER/MAIN MENU button to enter.
3. Turn Jog wheel #2 to select only pan/tilt or all channel.
4. Press ENTER/MAIN MENU Button to enter, all the LEDs will blink for 3 times, then
back to the last menu.