Manual

www.thomann.de
INVADER 2420
10
www.thomann.deINVADER 2420
10. Back to the last menu please press ESC/CLEAR button.
1.2 Modify a fixture profile
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 02.Modif a Fixture is shown on the monitor, press
ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #3 to chose the bank of other manufacturers, and Jog wheel #4 to
chose the ACME’s.
4. Press ENTER/MAIN MENU button to enter.
5. Use Jog wheel #2 and #4 to change the name of the FIXTURE. Turn Jog wheel #2
to change the position of the cursor, and Jog wheel #4 should change the trait of the
channel. The amount of the letters must be below 26, it can be include ten numbers,
one “—”, the length of the Fixture name should be below 16, and it must be begin
with letters.
6. Press ENTER/MAIN MENU Button to change the trait of the channel.
7. Use Jog wheel #2 and #4 to change the name of the FIXTURE. Turn Jog wheel #2
to change the position of the cursor, and Jog wheel #4 should change the trait of the
channel