User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
2. Press the number button [1 – 20] to select the desired chase. You can also
select multiple chases. Their numbers will be indicated in the display. The
number of the currently active Chase is ashing then. To activate the respec‐
tively next Chase, press the number button [1 – 20] of the currently active
Chase in order to deactivate it.
3. Turn jog wheel # 2 to switch to the previous or next programmed step within
the active Chase.
2. Sound-controlled mode
1. Press the [CHASE] button. Turn jog wheel # 1 to select the memory page on
which the desired Chase is stored. Now the LEDs of those number buttons light
up where Chases have already been stored.
2. Press the number button [1 – 20] to select the desired chase. You can also
select multiple chases. Their numbers will be indicated in the display. The
number of the currently active Chase is ashing then. To activate the respec‐
tively next Chase, press the number button [1 – 20] of the currently active
Chase in order to deactivate it.
3. Press the [MUSIC/BANKCOPY] button to call up the sound-controlled mode. The
LED of this button lights up then. Now the individual scenes programmed in
that Chase run sequentially to the beat of the music. The device then switches
to the next selected Chase, if available.
3. Automatic mode
1. Press the [CHASE] button. Turn jog wheel # 1 to select the memory page on
which the desired Chase is stored. Now the LEDs of those number buttons light
up where Chases have already been stored.
2. Press the number button [1 – 20] to select the desired chase. You can also
select multiple chases. Their numbers will be indicated in the display. The
number of the currently active Chase is ashing then. To activate the respec‐
tively next Chase, press the number button [1 – 20] of the currently active
Chase in order to deactivate it.
Operating
DMX Invader 2420 MK II
53