User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
1. Manual mode
1. Press the [BANK] button. Now the ‘MANUAL’ LED should light up. Otherwise
press the [MANUAL/REC] button to call up the manual mode.
2. Turn jog wheel # 1 to select the desired bank 1 – 60. The LEDs of those number
buttons [1 – 20] where scenes have already been programmed are ashing
now.
3. Press the desired number button [1 – 20] to activate the corresponding scenes.
2. Sound-controlled mode
1. Press the [BANK] button and turn jog wheel # 1 to select the desired bank 1 –
60.
2. Press the [MUSIC/BANK COPY] button to call up the sound-controlled mode.
The ‘MUSIC’ lights up then.
3. Now the scenes of the selected bank will run sequentially to the beat of the
music. When scenes with movements run in sound-controlled mode, the loop
duration stored in the scene determines the display time. Then it's o to the
next scene. Even now you can select another bank using jog wheel # 1.
If the sound control does not work or only unreliably, you should
adjust the audio sensitivity of the device as described here:
Ä
Chapter
6.1 ‘‘Setting’ menu’ on page 15.
Operating
DMX Invader 2420 MK II
51