User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
6. Press the [OVERRIDE] button.
7. Press the number button [1 – 20] to select the number for the Override to be
saved. All LEDs ash three times and thus indicate the successful programming
of an Override.
8. Repeat steps 3-7 to programme further Overrides.
6.2.22 Override editing
1. Call up the programming mode.
2. Press the [OVERRIDE] button.
3. Press the number button [1 – 20] to select the number of the Override to be
edited.
4. Press the [FIXTURE] button. Now the LEDs of the number buttons [1 – 20] of
those units that are involved in this Override light up. Use the number buttons
to deselect those units, whose eect you don't want to edit.
5. Use the channel faders or jog wheels # 1–# 4 to adjust the selected unit as
desired.
6. Press the [MANUAL/REC] button - now the LEDs of the buttons CUE, OVERRIDE,
CENTER, FIXTURE GROUP, PRESET, CHASE, BANK and BLACK OUT are ashing.
7. Press the [OVERRIDE] button.
8. Press that number button [1 – 20] that you have used in step 3. All LEDs ash
three times and thus indicate the successful editing of an Override eect.
9. Repeat steps 3-8 to edit further Overrides.
Operating
DMX Invader 2420 MK II
47