User manual: SW V1.0

6.2.17 Deleting a xture group
1. Call up the programming mode.
2. Press the [FIXTURE GROUP] button.
3. Hold down the [AUTO/DEL] button while pressing the number button [1 – 20]
of the Fixture group to be deleted. All LEDs ash three times and thus indicate
the successful deletion of the Fixture group.
4. Repeat steps 2-3 to delete further xture groups.
6.2.18 Center programming
1. Call up the programming mode.
2. The LED of the [FIXTURE] button should light up now. Otherwise, press the
[FIXTURE] button. Press the number button [1 – 20] to select the units you want
to save a Center position for.
3. Use the channel faders or the jog wheels # 1 – # 4 to adjust the desired Center
position for the functions PAN and TILT (FINE).
4. Press the [MANUAL/REC] button - now the LEDs of the buttons CUE, OVERRIDE,
CENTER, FIXTURE GROUP, PRESET, CHASE, BANK and BLACK OUT are ashing.
5. Press the [CENTER] button.
6. Press the number button [1 – 20] to select a memory slot for the Center. All
LEDs ash three times and thus indicate the successful saving of a Center posi‐
tion. All set DMX values that are not related to PAN & TILT are not saved.
7. Repeat steps 2–6 to save further Center positions.
Operating
DMX controller
44