User manual: SW V1.0

Table Of Contents
5. Press the number button [1 – 20] to select the number for the xture group. All
LEDs ash three times to conrm.
6. Repeat steps 2-5 to create further xture groups.
6.2.16 Fixture group editing
1. Call up the programming mode.
2. Press the [FIXTURE GROUP] button.
3. Press the number button [1 – 20] to select the number of the xture group that
you want to edit.
4. Press the [FIXTURE] button. Now all LEDs of the xtures belonging to this group
light up.
5. Press the number button [1 – 20] to deselect already selected xtures or to add
new ones.
6. Press the [MANUAL/REC] button - now the LEDs of the buttons CUE, OVERRIDE,
CENTER, FIXTURE GROUP, PRESET, CHASE, BANK and BLACK OUT are ashing.
7. Press the [FIXTURE GROUP] button.
8. Press the number button [1 – 20] that you have selected in step 2 to save the
changes under this xture group number. All LEDs ash three times.
If you have pressed dierent keys in steps 2 and 8, the xture group you
have selected in step 2 will override the xture group selected in step 8
including all modications.
Operating
DMX Invader 2420 MK II
43