User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
6.1.15 Erase all memory
1. Call up the main menu.
2. Turn jog wheel # 1 until ‘15. Erase all memory’ is displayed. Press the
[ENTER / MAIN MENU] button to activate this function.
3. If you have protected the memory contents of the device with a password, the
device prompts you now to enter the current six-digit password using the
number buttons [1-10] (‘10’ stands for ‘0’). Conrm the input with the
[ENTER / MAIN MENU] button. If the device accepts your input, move on to step
4, otherwise you will get another chance to enter a password.
4. Now the display shows ‘Erase all memory? [No]’ . Turn jog wheel # 2 to change
the display to ‘[Yes]’ .
5. If you now press the [ENTER / MAIN MENU] button the memory contents will be
irretrievably deleted without any further prompting. The three-time brief
ashing of all LEDs indicates the successful deletion.
6.1.16 Adjust audio input range
With this function you can test and adjust the sensitivity of the device for
the sound control.
1. Call up the main menu.
2. Turn jog wheel # 1 until ‘16. Audio input range adjust’ is displayed. Press the
[ENTER / MAIN MENU] button to activate this function.
3. Rotate jog wheel # 2 to adjust the sensitivity in a range from ‘001’ to ‘100’ . The
higher the number is, the higher the sensitivity. You can test the sensitivity
during the setting. As soon as the device detects an audio pulse, all LEDs ash
briey (except the Strobe and Stand Alone LEDs).
Operating
DMX controller
28