User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
6.1.14 Enable / disable the password
1. Call up the main menu.
2. Turn jog wheel # 1 until ‘14. Enable password’ is displayed. Press the
[ENTER / MAIN MENU] button to activate this function.
3. Turn jog wheel # 1 to select the ‘user power’ password or the ‘user memory
protect’ password. Press the [ENTER / MAIN MENU] button to conrm the selec‐
tion.
If you select ‘user power’ you need to enter the current password for
this protection function in order to use this product the next time you
start the device.
If you select ‘user memory protect’ you need to enter the current
password for this protection function next time you call the program‐
ming mode.
4. The display will prompt you to enter a password. Use the number buttons
[1-10] to enter the six digits of the current password (‘10’ stands for ‘0’). If you
enter a wrong password the wild card symbols for the previously entered
digits (*) disappear so that the box will be displayed empty again.
5. After a successful password entry, turn jog wheel # 2 to select ‘Enable’ or
‘Disable’ .
6. Press the [ENTER / MAIN MENU] button to conrm. All LEDs will ash three
times, thus indicating the success of the procedure.
7. Press the [ESC / CLEAR] button to return to the previous menu level.
Operating
DMX Invader 2420 MK II
27