User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
7. Press the [ESC / CLEAR] button to return to the previous menu level.
6.1.13 Modify password
1. Call up the main menu.
2. Turn jog wheel # 1 until ‘13. Modify password’ is displayed. Press the
[ENTER / MAIN MENU] button to activate this function.
3. Rotate jog wheel # 2 to toggle between ‘power on password’ , default setting)
and ‘memory protect password’ . Press the [ENTER / MAIN MENU] button to acti‐
vate the selected function.
4. Use the number buttons [1-10] to enter the 6 gures of the existing password
(‘10’ stands for ‘0’). If you enter a wrong password the wild card symbols for the
previously entered digits (*) disappear so that the box will be displayed empty
again.
The default password for both password-protected areas is ‘111111’ .
5. After correctly entering the existing password, you are prompted to enter 6
new gures using the number buttons [1-10]. You have to enter the new pass‐
word twice. After successfully changing the password, all LEDs blink three
times and the device automatically returns to the previous menu level.
6. Even now you can rotate jog wheel # 2 to change the password for the other
protection function as described above.
7. Press the [ESC / CLEAR] button to return to the previous menu level.
Operating
DMX controller
26