User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
7. Turn jog wheel # 2 to select the prole collection (‘STAIRVILLE proles’ or ‘other
proles’) where you want to store the device prole.
8. Press the [ENTER / MAIN MENU], all LEDs blink three times and thereby indicate
that you have successfully edited a device prole.
9. Repeat steps 3–8 to create up to 50 device proles.
10. Press the [ESC / CLEAR] button to return to the previous menu level.
6.1.2 Modify a xture prole
1. Call up the main menu.
2. Turn jog wheel # 1 until ‘02. Modify a xture prole’ is displayed. Press the
[ENTER / MAIN MENU] button to activate this function.
3. Turn jog wheel # 4 to select a prole from the STAIRVILLE prole collection.
Turn jog wheel # 3 to select a prole from the prole collection of another
manufacturer (‘other proles’). The respectively selected prole name appears
at the bottom left in the display.
4. Press the [ENTER / MAIN MENU] button to enable the selected prole. First, the
device oers to change the name.
5. If desired, turn jog wheels # 2 and # 4 to change to the name of the device.
Rotate jog wheel # 2 to change the cursor position. Turn Jog wheel # 4 to
change the character. You can choose from 26 letters and 10 numbers as well
as the special character ‘—’. The max. length of the device name is 16 charac‐
ters.
Operating
DMX Invader 2420 MK II
17