User manual: SW V1.0
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Connections and operating elements
- 6 Operating
- 6.1 ‘Setting’ menu
- 6.1.1 Create a new fixture profile
- 6.1.2 Modify a fixture profile
- 6.1.3 Delete a fixture profile
- 6.1.4 Patch a fixture
- 6.1.5 Reverse channel setup
- 6.1.6 Fade mode select
- 6.1.7 Blackout mode select
- 6.1.8 Midi channel select
- 6.1.9 Chase run by inside / outside time
- 6.1.10 Auto remote address
- 6.1.11 Reading from a USB drive
- 6.1.12 Writing to a USB drive
- 6.1.13 Modify password
- 6.1.14 Enable / disable the password
- 6.1.15 Erase all memory
- 6.1.16 Adjust audio input range
- 6.1.17 Channel value display mode
- 6.2 Programming mode
- 6.2.1 Programming a scene
- 6.2.2 Programming a scene with movement
- 6.2.3 Editing a scene
- 6.2.4 Copying a scene
- 6.2.5 Deleting a scene
- 6.2.6 Copying a bank
- 6.2.7 Programming a chase
- 6.2.8 Chase programming from all scenes of a bank
- 6.2.9 Replacing scenes of a chase
- 6.2.10 Adding scenes to a chase
- 6.2.11 Deleting scenes from a chase
- 6.2.12 Deleting a chase
- 6.2.13 Preset programming
- 6.2.14 Preset editing
- 6.2.15 Programming a fixture group
- 6.2.16 Fixture group editing
- 6.2.17 Deleting a fixture group
- 6.2.18 Center programming
- 6.2.19 Center editing
- 6.2.20 Deleting a Center
- 6.2.21 Override programming
- 6.2.22 Override editing
- 6.2.23 CUE programming
- 6.2.24 CUE editing
- 6.2.25 Deleting a Cue
- 6.2.26 Blackout scene programming
- 6.3 Function mode
- 6.4 Fogger operation
- 6.5 Strobe operation
- 6.6 Software update
- 6.1 ‘Setting’ menu
- 7 MIDI functions list
- 8 Notes on creating profiles
- 9 Technical specifications
- 10 Protecting the environment
[Fixture] To address up to 20 devices.
[Fixture Group] To set up and select up to 20 xture groups.
[Movement] To select 10 programmed movements (buttons 1-10 only).
[Preset] To set up and select COLOR presets (buttons [1-10]) and GOBO presets (buttons [11-20]) on
up to 20 memory pages.
[Cue] To select and programme up to 60 Cues.
[Chaser] To select and programme up to 60 Chases.
[Override] To select and programme up to 20 Overrides.
[Bank] To select and programme up to 1200 Scenes from 60 banks.
[Centre] To select and programme up to 20 Center positions.
23 [ESC/CLEAR]
Back to the previous menu level, or to delete values in programming mode.
24 [ENTER/MAIN MENU]
To access the main menu or conrm values.
25 LCD
Indicates the current device activity or programme status.
26 Jog wheels
With these encoders, you perform a lot of adjusting and selecting when operating of the device.
The following table shows you which DMX channels are assigned to the 24
channel faders by pressing the number buttons [1 – 20] (the LED of the
[FIXTURE] button must light up at this!).
Number buttons DMX channels Number buttons DMX channels
1 1-24 11 241-264
2 25-48 12 265-288
3 49-72 13 289-312
4 73-96 14 313-336
5 97-120 15 337-360
6 121-144 16 361-384
7 145-168 17 385-408
Fixture number channel list
Connections and operating elements
DMX Invader 2420 MK II
13