User manual

In dimmer mode, a certain amperage can be set for each channel to preheat the connected
lamps.
Proceed as follows to adjust the amperage:
1. Open the menu ‘PrEh’ , (see menu overview).
2. Press [Menu].
3. If the channel number display (left on the display) is ashing, you can adjust the desired
channel with the navigation keys or .
4. Conrm the selection and use [Menu] to toggle between channel number and
amperage.
5. If the default value display (right on the display) is ashing, you can determine the
desired amperage in a range from ‘0’ … ‘15’ with the navigation keys or .
6. Conrm the selection with [Menu].
7.
Use navigation button to return to the previous menu level.
Lamp preheat
Operating
digital dimmer and switcher
30