User manual

Depending on the settings, the channels of the device operate in Dimmer or Switch mode.
Proceed as follows to adjust the Channel mode:
1. Open the menu ‘d-Cu’ , (see menu overview).
2. Press [Menu].
3. If the channel number display (left on the display) is ashing, you can adjust the desired
channel with the navigation keys or .
4. Conrm the selection and use [Menu] to toggle between channel number and channel
function.
5. If the channel function display (right on the display) is ashing, you can assign the
desired function ‘di’ (Dimmer) or ‘On’ (Switch) with the navigation keys or .
6. Conrm the selection with [Menu].
7.
Use navigation button to return to the previous menu level.
Channel function
Operating
DDS 405
29