User manual

In these operating modes, the device works in Stand Alone mode. After selecting the oper‐
ating mode ‘Auto’ or ‘Snd’ you can enable one of the 20 programmes (Chasers) available. Each
programme consists of 32 steps. Depending on the operating mode, the control LED [Auto] or
[Sound] lights up.
1. Press the [Menu] button again to select a programme after selecting an operating mode.
ð
The last active programme is displayed in ‘Prxx’ format in the display.
2. Press [Menu] again.
3. If the programme number display is ashing, you can select the desired programme
with the navigation keys or .
4. Conrm the selection with [Menu].
5.
Use navigation button to return to the previous menu level.
Automatic and sound-con‐
trolled operation
Programme selecting
Operating
digital dimmer and switcher
26