User manual

1.
Use the navigation buttons or to select the operating mode ‘Sla’ .
ð
The control LED [Sla] is ashing.
2. Conrm the selection with [Menu].
ð
The display changes to ‘Addr’ .
3.
Use the navigation buttons or to switch to menu item ‘ChAd’ . Conrm the selection
with [Menu].
ð
The display shows the current setting, e. g. ‘1003’ .
4. The rst digit of the displayed value corresponds to the channel. If this digit is ashing,
you can select the desired channel with the navigation keys or . Conrm the selec‐
tion with [Menu].
ð
The three right digits of the displayed value are ashing.
5.
Now use the navigation keys or to set the desired address for the active channel.
Conrm the selection with [Menu].
6.
Use navigation button to return to the previous menu level.
Operating
DDS 405
25