User manual

In this mode the device is controlled via a connected DMX controller and operates in Slave
mode. The control LED [DMX] lights permanently as soon as a DMX signal is present.
The four channels can be addressed consecutively or individually.
Consecutive addressing:
1.
Use the navigation buttons or to select the operating mode ‘Sla’ .
ð
The control LED [Sla] is ashing.
2. Conrm the selection with [Menu].
ð
The display changes to ‘Addr’ .
3. Conrm the selection with [Menu].
ð
The display changes to ‘A001’ .
4. Conrm the selection with [Menu].
5. Once the three right digits of the displayed value will ash, you can use the navigation
keys or to set the address of the rst channel. Conrm the selection with [Menu].
6.
Use navigation button to return to the previous menu level.
Individual addressing:
Operating mode ‘DMX’
Operating
digital dimmer and switcher
24