User manual

When setting channel 1, the following channels are automatically addressed consec‐
utively. This addressing may be adjusted as described above.
In Test mode, you can check the individual channels.
1. Open the menu ‘Test Ch 1= 0’ (see menu overview).
2. Conrm with the [Menu] button.
ð
The channel number display ashes.
3.
Select the desired channel with the navigation buttons or .
4.
Change with the navigation buttons and between channel number and channel
value.
5. Press the [Menu] button to exit Test mode.
ð
The display shows the conrmation prompt ‘Save Changes?’ .
6. Conrm the prompt with [Menu] to save the changed settings.
Test mode
Operating
dimmer pack
30