User manual

The preheat can be adjusted in a range from 0…50, where a value of 50 corresponds to
approx. 20 %.
In Switch mode ( ‘O’ to DMX 80, ‘On’ from DMX 160), this function is not available.
Proceed as follows to adjust the preheat:
1. Open the menu ‘Unit Setup’ , ‘Preheat Ch1 = 0’ (see menu overview).
2. Conrm with the [Menu] button.
ð
The channel number display ashes.
3.
Select the desired channel with the navigation buttons or .
4.
Use the navigation button to change to the preheat value.
ð
The displayed value ashes.
5.
Adjust the value using the navigation buttons or .
6. Press the [Menu] button.
ð
The display shows the conrmation prompt ‘Save Changes?’ .
7. Conrm the prompt with [Menu] to save the new settings. To discard the changes, press
the navigation button to return to the previous menu level.
Setting the preheat
Operating
dimmer pack
28