User manual

The device oers the possibility to limit the maximum voltage for each channel, for example,
to extend the life of the illuminants used.
Proceed as follows to adjust the maximum voltage:
1. Open the menu ‘Unit Setup’ , ‘Limit Ch 1=100’ (see menu overview).
2. Conrm with the [Menu] button.
ð
The channel number display ashes.
3.
Select the desired channel with the navigation buttons or .
4.
Use the navigation button to change to the voltage value.
ð
The displayed value ashes.
5.
Adjust the value using the navigation buttons or .
6. Press the [Menu] button.
ð
The display shows the conrmation prompt ‘Save Changes?’ .
7. Conrm the prompt with [Menu] to save the new settings. To discard the changes, press
the navigation button to return to the previous menu level.
Setting the maximum voltage
Operating
D1210T, D1210H
27