User manual

The device can be operated in dimmer mode (Linear, Sqrt, Exp1, Exp2) or in Switch mode ( ‘O’
to DMX 80, ‘On’ from DMX 160).
Proceed as follows to adjust the dimmer curve:
1. Open the menu ‘Unit Setup’ , ‘Ch Curve’ (see menu overview).
2. Conrm with the [Menu] button.
ð
The channel number display ashes.
3.
Select the desired channel with the navigation buttons or .
4.
Use the navigation button to change to the curve value.
ð
The displayed value ashes.
5.
Select the desired setting with the navigation buttons or .
6. Press the [Menu] button.
ð
The display shows the conrmation prompt ‘Save Changes?’ .
7. Conrm the prompt with [Menu] to save the new settings. To discard the changes, press
the navigation button to return to the previous menu level.
Setting the dimmer curve
Operating
dimmer pack
26