User manual

6 Operating
Once you connect the device to the power supply, the LEDs of the connected blocks light red.
Turn on the required channels via the associated circuit breakers (LEDs of active channels light
up green).
To switch o, disconnect the power plug from the 32-A-CEE outlet.
DANGER!
Hazardous voltage
Hazardous voltage may be present at cable ends and screw terminals.
The connection of screw terminals as well as all maintenance and repair work on
the electrical installation of the device must only be performed by qualied elec‐
trical personnel in volt-free condition. Failure to do so may result in electric shock
and risk of re and loss of life.
By all means you have to observe all electrical safety instructions applicable at the
place of operation.
Turning on and o
Operating
dimmer pack
24