User manual

The device is designed for mounting in 19" racks, it occupies two rack units (RU).
First, connect the loads to the terminals on the back of the device. Establish the DMX link to
the controller.
D1210T (item 327878): Finally, connect the device via the 3-phase screw terminal block to
the power supply
D1210H (item 153386): Finally, connect the power plug of the device to a 32 A CEE socket.
Connection options for blocks L1, L2 and L3:
n one block per phase
n one block to one phase, two blocks to a second phases
n all blocks to one phase
Regardless of the actual use, all three blocks should always be connected.
Installation and starting up
dimmer pack
16