User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Setup
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Device functions
- 7.3 Foot switch
- 7.4 Remote control
- 7.5 Operating on the unit
- 7.6 Menu overview
- 7.7 Functions in 2-channel DMX mode
- 7.8 Functions in 3-channel DMX mode
- 7.9 Functions in 4-channel DMX mode
- 7.10 Functions in 7-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
n ‘3-ch’ (three channels)
n ‘4-ch’
(four channels)
n ‘8-ch’ (eight channels)
n ‘14ch’
(14 channels)
n ‘2-ch’ (two channels)
n ‘7-ch’
(seven channels)
This setting is only relevant if the device is serving as Slave in a Master / Slave conguration
and is not controlled via DMX.
Press [Mode] repeatedly until the display shows ‘SLAv’ .
Operating mode ‘Slave’
Operating
CLB4 RGB Compact LED Bar 4
41