User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Setup
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Device functions
- 7.3 Foot switch
- 7.4 Remote control
- 7.5 Operating on the unit
- 7.6 Menu overview
- 7.7 Functions in 2-channel DMX mode
- 7.8 Functions in 3-channel DMX mode
- 7.9 Functions in 4-channel DMX mode
- 7.10 Functions in 7-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press [Mode] repeatedly until the display shows ‘AUTO’ . The playback of ‘Pr02’ to ‘Pr14’ starts
automatically.
To adjust the programme speed, press [Setup]. The display shows ‘SPxx’ . Use [Up] and [Down]
to select a value between ‘SP01’ (slow) and ‘SPFL’ (fast).
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS00’ . Use [Up] and
[Down] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast).
Operating mode ‘Automatic’
Operating
CLB4 RGB Compact LED Bar 4
39