User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Setup
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Device functions
- 7.3 Foot switch
- 7.4 Remote control
- 7.5 Operating on the unit
- 7.6 Menu overview
- 7.7 Functions in 2-channel DMX mode
- 7.8 Functions in 3-channel DMX mode
- 7.9 Functions in 4-channel DMX mode
- 7.10 Functions in 7-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Use [ON/OFF] to switch the device on and o.
Press [AUTO]. The playback of ‘Pr02’ to ‘Pr14’ starts automatically.
Press [PRG]. Use [+] and [–] to select a value between ‘Pr.01’ and ‘Pr.14’ .
In the ‘Preprogrammed automatic show’ mode, you can activate the strobe eect. Press
[STROBE] and use [+] and [–] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast). Press
again [STROBE] to turn the strobe eect o.
For the programmes ‘Pr.01’ and ‘Pr.09’ , it is possible to adjust the process speed. Press [SPEED]
and use [+] and [–] to select a value between ‘SP01’ (slow) and ‘SPFL’ (fast).
Press [SOUND]. This activates a sound controlled automatic show.
Use [+] and [–] to adjust the sensitivity of the sound control in a range from ‘SU.01’ to ‘SU.31’ .
Press [Dimming] to adjust the brightness level of the primary colours. Press [R] (red), [G]
(green), or [B] (blue) and use [+] and [–] to select a value between 0 and 255.
Switching on / o
Operating mode ‘Automatic’
Operating mode ‘Preprog‐
rammed automatic show’
Sound control
Dimming
Operating
CLB4 RGB Compact LED Bar 4
35