User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Setup
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Device functions
- 7.3 Foot switch
- 7.4 Remote control
- 7.5 Operating on the unit
- 7.6 Menu overview
- 7.7 Functions in 2-channel DMX mode
- 7.8 Functions in 3-channel DMX mode
- 7.9 Functions in 4-channel DMX mode
- 7.10 Functions in 7-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1 [ON/OFF]
Turns the device on and o.
2 [AUTO]
Activates the ‘Automatic‘ mode.
3 [PRG]
Activates the operating mode ‘Preprogrammed automatic show’. Select the desired programme with [+] and [–].
4 [SOUND]
Activates the Sound-controlled mode. Set the sensitivity of the built-in microphone with [+] and [–].
5 [SPEED]
Activates the setting mode for the programme speed. Adjust the speed using [+] and [–].
6 [STROBE]
Activates the setting mode for the Strobe speed. Adjust the speed using [+] and [–].
7 [+]
Increases the set value.
Connections and operating elements
CLB4 RGB Compact LED Bar 4
29