User manual

NOTICE!

Fire hazard

Do not operate the machine unattended.

Connect the device to the mains power grid and turn it on with the main switch. During the

warm-up time of about 5 minutes the display shows ‘UP’ . Once the device is operational, the

display will change to ‘rEAd’ .

When the machine receives a DMX signal, the display shows the set DMX address, even during

start-up and warm-up time. Then the unit does not respond to manual control commands, you

only have the option to adjust the DMX address via the device menu.

Operation with an empty uid container can lead to overheating and permanent damage of

the pump. When operating, always ensure that there is sucient fog uid in the liquid con‐

tainer to avoid no-load running.

Turning the unit on

Operation

Operating

fog machine