Specification

Standard Nosing Submittal & Specifications
Stainless Steel Stair Nosing
Stairnosing used for interior and exterior stairs. The nosing’s are made with 304 stainless steel, 18 gauge with a 2B finish. The steel
is free of mercury and radiation contamination. Slip resistant tested and meets ADA regulations. Can be installed onto wood, steel
or concrete stairs, using furnished screws, anchors, epoxy or tack-welded.
CIRCLE ONE:
A. Carpet Tile/Rolled/LVT Profile
B. Tile/Stone Profile
C. Wood Profile
Select Degrees: 90 / 95 / 99 90 / 95 / 99 90 / 95 / 99
ORDERING INFORMATION
Product Data & Ordering Info:
Material: 18 Gauge, 304 Stainless Steel
Packaged: Up to 6 pieces per box, shipped with screws
and anchors.
Storage:
Keep stacked and neatly wrapped. Stored in room
temperature.
Uses:
Stairs, walls, counters, carpet, tile, stone and wood floors
HOW TO CLEAN
Problem
Cleaning Agent
Comments
Routine Cleaning
All finishes
Soap or mild detergent and water (Preferably
warm)
Sponge, rinse with clean water, wipe dry if
necessary. Follow polish lines.
Scratches on Polished (Satin)
Finish.
Slight scratches - use impregnated nylon pads.
Polish with scurfs dressed with iron-free abrasives
for deeper scratches. Follow polish lines. Then
clean with soap or detergent as for routine
cleaning.
Do not use ordinary steel wool - iron particles
can become embedded in stainless steel and
cause further surface problems. Stainless steel
and "Scotch-brite" scouring pads are
satisfactory.
Tech and Sales Support: [phone]
[e-mail]
FINISH
(CIRCLE ONE)
NOSING
SIZE
(CIRCLE ONE)
NOSING
LENGTH
(CIRCLE ONE)
WEIGHT
Stainless / Brushed
¼”
4 ft.
2.40 lbs
Stainless / Brushed
½”
4 ft.
2.80 lbs
Stainless / Brushed
¾”
4 ft.
3.20 lbs
Stainless / Brushed
¼”
5 ft.
3.0 lbs
Stainless / Brushed
½”
5 ft.
3.50 lbs
Stainless / Brushed
¾”
5 ft.
4.0 lbs
Stainless / Brushed
¼”
8 ft.
4.80 lbs
Stainless / Brushed
½”
8 ft.
5.60 lbs
Stainless / Brushed
¾”
8 ft.
6.40 lbs
Stainless / Brushed
¼”
10 ft.
6.0 lbs
Stainless / Brushed
½”
10 ft.
7.0 lbs
Stainless / Brushed
¾”
10 ft.
8.0 lbs