Operation Manual

075-0041_A 9
1-4 Auto CH Search
1-5 Manual CH Setting
1) Use CHANNEL  keys to select Auto CH Search.
2) Use Volume  key to enter.
Broadcasting frequency is automatically searched and
saved. The search starts from analog TV (NTSC) to
digital TV (VSB/QAM), and it takes 2~4 min.
Channel numbers are allocated for weak signals from
analog broadcasting. IN DTV, weak signals or signals
without broadcasting data are ignored.
1) Use Channel  keys to select Manual CH.
2) Use Volume  key to enter channels listed.
3) Use Channel  keys to select channel
4) Use Volume  set options:
Viewable – Not Viewable
For Channel Default* / Auto Default* please refer to
Custom Features
Depending on the content provided by the cable or satellite
company, there may be some content received that is
inappropriate for your intended viewing audience. Once
channel scanning is complete, these channels can be deleted
as necessary by using the IR remote control.
If the content provider does not provide an encoded rating for
the content (Eg: MA14), inappropriate content will not be
blocked by the parental control setting of the screen.
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume  to enter.
Enter MENU (0002) and CHANNEL  to “Channel”
Use Volume  to enter.
To EXIT
1) Push VOLUME  to exit Sub MENU / MENU
This TV is equipped with an instant channel programming feature. The television tuner is preset
to Cable Standard – QAM. To program the TV in one step, complete the Signal / Power
Connections and press 0001 to begin channel programming Scan.
To access the Auto Scan through the MENU:
Instant Channel Programming Feature Installation Notice!