Operation Manual

075-0041_A 22
5-3 PRIVATE NETWORK CHANNEL DEFAULT
Exclusive feature works with in-club private TV networks including ClubCom™ and Digital Signage systems.
When turned on the TV will automatically go the club promotional channel. The user cannot change the channel
until the promotional programming has ended. The TV then changes to the secondary club ‘Home Channel” at
which time the user can change to any desired TV channel.
1) Use CHANNEL  and highlight DETECT VIBRATION.
(Detects vibration or use of the cardio equipment)
2) Press “OK” to cycle through and select the desired
vibration monitoring time in minutes (1-8). When no
vibration is detected on the cardio equipment for the
assigned number of minutes the TV will automatically
switch to the club Home channel. (Step 11)
3) Press  and highlight CHANNEL DEFAULT TIME to
set the desired viewing time of the Promotional Network
Channel.
4) Press Volume  to cycle through and select time setting.
(Off - 10 - 20 - 30 - 40 – 50 – 60 seconds)
a. During this programmed time the viewer will be
unable to navigate off the Promotional Network
Channel.
5) Use CHANNEL and highlight CHANNEL DEFAULT.
6) Press Volume  to cycle through and set to “ON.”
7) Use CHANNEL  and highlight AUTO DEFAULT.
8) Press Volume  and cycle through and set to “ON.”
9) Use CHANNEL and highlight MANUAL CH SETTING.
10) Press Volume  to enter and go to TV CHANNEL LIST.
11) Use CHANNEL  to scroll to the desired channel to be
set as the HOME channel.
12) Press Volume  to cycle / select “AUTO DEFAULT.”
a. This channel is now assigned as the channel the TV
will switch to when no vibration is detected on the
cardio equipment or when the HOME key is
pressed.
13) Use CHANNEL  to scroll to desired channel to be set
as the Promotional Network Channel at TV start up.
14) Press Volume  to cycle / select “Channel Default.”
a. This channel is now assigned as the channel the TV
will default to upon being turned on.
b. User will be unable to navigate off this channel
during the preset Channel Default Time.
(Step 3)
Set the TV’s Vibration Detect Circuit……
Set the Channel Default Time…………….
Activate Channel Default……………….…
Activate Auto Default……………..…….….
Go to TV Channel List…….……....…….…
Set the HOME channel………………..……
The
Set the Promotional Network channel….
Enter Custom Features (0003)
To EXIT
1) Push VOLUME  to exit Sub MENU / MENU