Specification
16” x 56” Fixture Panel Dimensions
32” Bin
16” panel
1”from top
8” space
between
xtures
13” dispenser
Stainless Steel Paper
Towel Systems
MANUFACTURED
IN THE USA
L SYSTEM
Installation
Instructions
32”
1” slot 4 1/2” down 4 1/8” centers
4 1/2”
4 1/8”
2”
1” keyhole mounts 8” centers
9 3/4”
5 3/4”
13”
11”
L SYSTEM
2”from
bottom
16”
8”
Flat head bolts
entered from behind
panel
Trash Bin
Wall Panel
Folded Towel Dispenser
4 short at head bolts
entered from behind panel
Lock washer
& nut
2 piece panel split at
31” high trash bin covers
seam.
Lock washer & nut
mounted from
inside bin, tight for per-
manent
mounting, loose
for removable
Spacer lock
washer & nut to cre-
ate gap for bin
liner
56” high
Panel split at 31” high
---------------------------------------------
2 3/8”
4”
1”
25”
31”
Top of bin over-
laps split
11 1/8”
16”
4”
All holes 1/4”
Mounting Instructions
1. 4 at head bolts
entered from behind panels before
hanging on wall.
2. Screw lock washer & nuts to bolts
for bin rmly to bottom panel before
hanging panel on wall.
3. Mount paper towel
dispenser to top panel with 2 at
head bolts and lock washers &
nuts tightly before hanging panel.
4. Hang panels to wall with adhesive
or with additional holes in panel (drill
bits are available from Royce Rolls
at no charge).
Do not use xture holes to
mount panel to wall.
5. Bin is designed to be removable
for cleaning. Screw 2 additional lock
washers & nuts loosely to bin panel
bolts. Hang bin on keyhole mounts.
Tighten bolts rmly for permanent
mounting.
Stainless
Solutions
STAINLESS SOLUTIONS
Grand Rapids, Michigan Since 1925 ALL PRODUCTS GUARANTEED 10 YEARS
PHONE 616-361-7737 FAX 616-361-5976 www.StainlessSolutions.net